Making Your Array Bootable - Adaptec SCSI 58300 Installation And User Manual

9
Partition and format your logical drive.
The logical drive you created appears as a physical disk drive on your operating system.
You must partition and format these logical drives before you can use them to store data.
10
Close all windows, then click Reboot to restart your system.
11
Remove the HostRAID Installation CD.
For information on installing and using Adaptec Storage Manager as a full software
application, refer to the Adaptec Storage Manager User's Guide provided on the Adaptec
Storage Manager CD.
12
Continue with

Making Your Array Bootable

Use the ACU to make the array bootable (see
Continue with
Making Your Array Bootable
Installing the Driver and an Operating System on page
Chapter 6: Creating a Bootable Array
(next section).
Managing Bootable Arrays and Devices on page
41.
l 40
72).