Sco Openserver And Unixware Monitor Messages - HP P3410A - NetRAID 1M RAID Controller User Manual

Chapter 7
SCO OpenServer and UnixWare Monitor
Messages
Table 7-3. SCO OpenServer and UnixWare Monitor Messages
Condition
Monitor starts
Monitor deactivated
No adapter found
Adapter inquiry failed
Physical drive state
change
Physical drive rebuilding
(when monitor starts)
Rebuild percentage
completed
Rebuild failed
Rebuild over
(completed)
Logical drive state
change
Logical drive state at
startup
Messages
HP NetRAID Monitor activated
HP NetRAID Monitor deactivated
No HP NetRAID adapter found
HP NetRAID inquiry failed for adapter x
Adapter: # PDrv Channel: SCSI ID # state change from
(previous state) to (new state).
Adapter: # PDrv Channel: SCSI ID# At startup is in
Rebuild state
Adapter: # PDrv Channel: SCSI ID# Rbld X% over
Adapter: # PDrv Channel: SCSI ID# Rbld failed
Adapter: # PDrv Channel: SCSI ID# Rbld over
Adapter: # LDrv # state change from (previous state) to
(new state).
Adapter: # LDrv # state at startup is (current state)
Monitor Alert List
139