Chapter 2
Adapter
Configuration
Menu
Menu
Server
Selector
Physical
Drives
Figure 2-3. HP NetRAID Assistant Main Window
NOTE
Since HP NetRAID-1Si is a single-channel adapter, the
HP NetRAID Assistant Main window for HP NetRAID-1Si
contains only Channel 0 information. In HP NetServer LH 3/3r
and LH 4/4r, the integrated HP NetRAID controller can show
either one or two channels depending upon how many channels
you enabled for HP NetRAID. Integrated HP NetRAID
controllers in other HP NetServers show two channels.
To configure arrays and logical drives, follow these steps:
Select adapter to configure.
Clear previous configuration, if necessary.
Check the Rebuild Rate.
Assign global hot spares.
Select the Wizard.
26
Physical
Logical
Progress
Drive
Drive
Menu
Menu
Menu
Adapter Selector
HP NetRAID Assistant
Help
Menu
Toggle
Between
Views