HP P3410A - NetRAID 1M RAID Controller User Manual page 104

Chapter 4
a. Choose Select Adapter from the Tools Management menu.
b. Choose the adapter with the mismatched configuration.
8. Choose Configure from the Tools Management menu.
9. Choose View/Add/Delete from the Configure menu.
10. Choose View Disk Configuration from the View/Add/Delete menu.
11. After scanning has finished, press Esc.
12. Choose Yes to save the configuration. The HP NetRAID Express Tools
utility now updates the configuration stored in NVRAM on the newly
installed adapter.
13. Press Esc repeatedly to exit HP NetRAID Express Tools.
14. Press Ctrl+Alt+Delete to restart the system. The HP NetRAID Series
adapter should recognize all the drives and the previous logical
configuration.
15. Verify that the new adapter has all of the same adapter settings as the
adapter you removed, and make changes as necessary. These settings
include parameters such as the Rebuild Rate, Autorebuild, Power Fail
Safeguard, Alarm Control, and Cache Flush Timings.
98
HP NetRAID Express Tools