HP P3410A - NetRAID 1M RAID Controller User Manual page 44

Chapter 2
5. Launch the HP NetRAID Assistant Wizard by selecting Wizard from the
Configuration menu.
6. Use the Wizard to configure the adapter's arrays and logical drives.
7. Save the configuration and print it.
Initialize Logical Drives
All logical drives must be initialized.
CAUTION Initializing a logical drive by using the Initialize menu
selection destroys all data currently on the disk modules.
To initialize the logical drives you defined for the adapter in the HP NetRAID
Assistant Wizard:
1. If you have more than one adapter, click the Adapter pull-down list and
select the adapter.
2. Select the logical drives to be initialized.
3. Choose Initialize from the Logical Drive menu and click OK.
The Initialize screen appears with separate windows for each logical drive.
The bar graph for each logical drive shows the progress of the
initialization.
4. Click the Abort button if you need to stop the initialization of that logical
drive.
5. To rearrange individual windows, click the Arrange menu and make a
selection.
6. Repeat the initialization process for other logical drives and adapters as
necessary.
Exit HP NetRAID Assistant
To exit HP NetRAID Assistant, select Exit from the Configuration menu. You
cannot exit if disk operations are still occurring.
38
HP NetRAID Assistant