Dvd+Rw Installation Instructions; Figure 3-9 Removable Media Bay Location - HP Integrity rx7620 Installation Manual

DVD+RW Installation Instructions

The CD/DVD/DAT is located in the front of the chassis. The system power to this component must be removed
before attempting to remove or replace it. Follow the procedures below to install the DVD+RW drive.
CAUTION Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
safety precautions could result in damage to the server.
Figure 3-9 Removable Media Bay Location
Step 1. Remove the front bezel and top cover. and in the Remove and Replace Procedures.
Step 2. Remove the drive bay blank or removable media drive.
Step 3. Verify that the SCSI and power cables have the appropriate service length required.
Chapter 3
Installing Additional Components
DVD+RW Installation Instructions
61