Figure 3-8Pci I/O Slot Details - HP Integrity rx7620 Installation Manual

Installation guide, seventh edition - hp integrity rx7620 servers

Hide thumbs Also See for Integrity rx7620:

Table of Contents

Installing Additional Components

PCI-X Card Cage Assembly I/O Cards

The green power LED will start to blink.

Figure 3-8PCI I/O Slot Details

Step 7. Wait for the green power LED to stop blinking.

Step 8. Check for errors in the hotplug daemon log file (default: /var/adm/hotplugd.log).

The critical resource analysis (CRA) performed while doing an attention button initiated add action

is very restrictive and the action will not complete–it will fail–to protect critical resources from

being impacted. For finer control over CRA actions use pdweb or the olrad command. Refer to the

Interface Card OL* Support Guide located on the Web at http://docs.hp.com for details.

Step 9. Replace the top cover.

Step 10. Connect all cables to the installed PCI card.

Manual Release Latch Closed

Manual Release Latch Open

Power LED (Green)

Attention LED (Yellow)

Attention Button

Chapter 3

Table of Contents