Setting Up The Customer Engineer Tool (Pc) - HP Integrity rx7620 Installation Manual

Cable Connections
MP Core I/O Connections

Setting Up the Customer Engineer Tool (PC)

The Customer Engineer (CE) Tool is usually a laptop. It allows communication with the Management
Processor (MP) in the HP Integrity rx7620 Server. The MP monitors the activity of either a one partition or a
multiple-partition configuration.
During installation, communicating with the MP enables such tasks as:
• Verifying that the components are present and installed correctly
• Setting LAN IP addresses
• Shutting down cell board power
Communication with the MP is established by connecting the CE Tool to the local RS-232 port on the MP Core
I/O card.
Setting CE Tool Parameters
After powering on the CE Tool, ensure the communications settings are as follows:
• 8/none (parity)
• 9600 baud
• na (Receive)
• na (Transmit)
78
Chapter 4