Projecting - Sony VPL-EX130 Operating Instructions Manual

2 Video cable (not supplied) or S-Video cable
(not supplied)
To connect to a video GBR/
Component output connector
Rear side
to
to audio
audio
output (R)
output
(L)
VCR
1 Signal Cable (not supplied)
HD D-sub 15-pin (male) ↔ 3 × phono jack
2 Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
Notes
• For stereo audio connection, connect the
stereo audio connecting cable to the INPUT
A/B AUDIO connector.
• Set the aspect ratio using "Aspect" on the
INPUT SETTING menu according to the
input signal.
• When you connect the projector to a video
GBR output connector, select "Video GBR"
or when you connect the projector to a
component output connector, select
"Component" with the "Input-A Signal Sel."
setting on the SET SETTING menu.

Projecting

1,2
to video
GBR/
component
output
Remote
control
detector
4
1
4 7
INPUT NETWORK USB
MENU APA
ENTER
RESET
KEYSTONE
AUTO FOCUS LENS
/TILT
PIC MUTING
D ZOOM VOLUME FREEZE AUDIO MUTING
Plug the AC power cord into a wall
outlet, and connect all equipment, then
remove the lens cover.
1
8
2
7
7
19
Projecting