Projecting/Adjusting An Image; Projecting An Image - Sony VPL-SW620 Operating Instructions Manual

B Projecting/Adjusting an Image

Projecting an Image

The size of a projected image depends on the distance between the projector and screen. Install
the projector so that the projected image fits the screen size. For details on projection distances
and projected image sizes, see
Notes
• Due to the characteristics of ultra short throw projector, the image may appear uneven on a
projection surface that is not absolutely flat. This is not a malfunction of the projector.
• Project the image on a flat surface.
Projector
1
Plug the AC power cord into the wall
outlet.
2
Connect all equipment to the projector
(page 9).
3
Press the ?/1 key to turn on the unit.
4
Turn on the connected equipment.
14
Projecting an Image
"Projection Distance and Lens Shift Range" (page 85)
2
3 5
5
6
4
Video equipment
6
Computer
1
Wall outlet
Select the input source.
Press the INPUT key on the projector to
display the menu for switching input
signal on the screen. Press the INPUT
key repeatedly, or press the
select an image to be projected.
When projecting a computer image,
switch your computer's output to
external display.
The method to switch the output varies
depending on the type of computer.
.
/ key to
V v