About The Preset Memory No - Sony VPL-EX130 Operating Instructions Manual

Setting items Functions
Aspect (When the You can set the aspect ratio of the picture to be
PC signal is input) displayed for the current input signal. This item is
enabled only when an PC signal (preset memory
numbers 21 to 63) is input.
• Full 1: Displays a picture vertically or horizontally to
• Full 2: The original image is projected fully in the
• Normal: Displays the picture while matching one
Notes
• For Aspect, some of the "Aspect" setting items are not displayed on the screen according to the
input signal.
• Note that if the projector is used for profit or for public viewing, modifying the original picture by
switching to the wide mode may constitute an infringement of the rights of authors or producers,
which are legally protected.

About the Preset Memory No.

This projector has 45 types of preset data for
input signals (the preset memory). When a
preset signal is input, the projector
automatically detects the signal type and
recalls the data for the signal from the preset
memory to adjust it to an optimum picture.
The memory number and signal type of that
signal are displayed on the INFORMATION
menu (See page 37). You can also adjust the
preset data through the INPUT SETTING
menu.
See the chart on page 49 to find if the signal
is registered in the preset memory.
Note
When the aspect ratio of input signal is other
than "Full 2," a part of the screen may be
displayed in black.
fill the screen without changing the aspect ratio of the
original picture.
window.
pixel of input picture element to that of the LCD. The
picture will be clear but the picture size will be
smaller.
Initial setting
Set according to
the input signal
The INPUT SETTING Menu
31