Specifications - Sony VPL-EX130 Operating Instructions Manual

Specifications

Optical characteristics
Projection system
3 LCD panels, 1 lens, projection
system
LCD panel 0.63-inch (16.0 mm) XGA panel,
about 2,360,000 pixels (1024 ×
768 × 3)
Lens 1.2 times zoom lens
f 18.63 to 22.36 mm/F1.65 to 1.8
Lamp 210 W Ultra high pressure lamp
Projected picture size
40 to 300 inches
(1,016 to 7,620 mm)
1)
Light output 3000 lm
1)
When the Lamp Mode is set to "High."
Throwing distance (When placed on the floor./
Adjuster not stretched, and the V Keystone
function has been done.)
40-inch (1,016 mm): 1.2 to 1.4 m
(3.9 to 4.6 feet)
80-inch (2,032 mm): 2.4 to 2.7 m
(7.9 to 8.9 feet)
100-inch (2,540 mm): 3.0 to 3.4 m
(9.8 to 11.1 feet)
150-inch (3,810 mm): 4.5 to 5.2 m
(14.8 to 17.1 feet)
200-inch (5,080 mm): 6.0 to 6.9 m
(19.7 to 22.6 feet)
250-inch (6,350 mm): 7.5 to 8.6 m
(24.6 to 28.2 feet)
300-inch (7,620 mm): 9.0 to 10.3 m
(29.5 to 33.8 feet)
Electrical characteristics
Color system NTSC
NTSC
PAL60 system, switched
automatically/manually
(NTSC
when playing back a video
recorded in NTSC on a
NTSC
Resolution 750 horizontal TV lines (Video
input)
1024 × 768 dots (RGB input)
Acceptable computer signals
fH: 19 to 92 kHz
fV: 48 to 92 Hz
(Maximum input signal resolution:
SXGA+ 1400 × 1050
fV: 60 Hz)
46
Specifications
/PAL/SECAM/
3.58
/PAL-M/PAL-N/
4.43
is the color system used
4.43
system VCR.)
4.43
2)
2)
Set the resolution and the frequency of the
signal of the connected computer within the
range of acceptable preset signals of the
projector.
Applicable video signals
15 k RGB/component 50/60 Hz,
Progressive component 50/60
Hz, DTV (480/60i, 575/50i,
480/60p, 575/50p, 720/60p,
720/50p, 1080/60i, 1080/50i),
Composite video, Y/C video
Speaker Monaural speaker system, 40 ×
28.5 mm (1
Speaker output
1 W (max.) × 1
Input/Output
VIDEO IN VIDEO: phono type
Composite video: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-
pintype
Y (luminance): 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
C (chrominance): burst 0.286
Vp-p ±2 dB (NTSC) (75 ohms
terminated), burst 0.3 Vp-p ±2
dB (PAL) (75 ohms terminated)
INPUT A RGB: HD D-sub15-pin (female)
Analog RGB/component:
R/R-Y: 0.7 Vp-p ±2 dB (75
ohms terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
B/B-Y: 0.7 Vp-p ±2 dB (75
ohms terminated)
HD: Horizontal sync input: TTL
level, positive/negative
VD: Vertical sync input: TTL
level, positive/negative
INPUT B RGB: HD D-sub15-pin (female)
Analog RGB:
R: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
B: 0.7 Vp-p ±2 dB (75 ohms
terminated)
HD: Horizontal sync input: TTL
level, Positive/negative
VD: Vertical sync input: TTL
level, positive/negative
5 1
/ × 1 / inches)
8 8