Connector Panel - Sony VPL-EX130 Operating Instructions Manual

Connector Panel

a VIDEO IN connector
• S VIDEO (mini DIN 4-pin):
Connects to the S video output of
video equipment.
• VIDEO (phono type):
Connects to the video output of video
equipment.
• AUDIO (stereo minijack):
To listen to sound output from video
equipment, connect via this jack to the
audio output of the video equipment.
b INPUT A/B AUDIO connector
Inputs audio signal attached to the image
from INPUT A or INPUT B.
c INPUT A connector
RGB (HD D-sub 15-pin, female):
Inputs a computer signal, video GBR
signal, component signal, or DTV signal
depending on the connected equipment.
Connects to the output connector of
equipment using the supplied cable or an
optional cable.
For details, see "Connecting a
Computer" on page 17 and
"Connecting a VCR" on page 18.
d INPUT B connector
RGB connector (HD D-sub 15-pin,
female):
Inputs a computer signal.
14
Location and Function of Controls
1 2 3 4 5 6
Connects to the output connector of
equipment using the supplied cable or an
optional cable.
e OUTPUT connector
• MONITOR (HD D-sub 15-pin
female):
Connects to the input connector of the
monitor. Only the computer signal on
the current channel is output from
among the signals connected to
INPUT A or INPUT B.
• AUDIO (stereo minijack):
Connects to the active speaker. Adjust
the volume with VOLUME +/– on the
remote commander.
When INPUT A or INPUT B is
selected, the output audio is the signal
input to AUDIO (INPUT A/B
AUDIO) that is common to INPUT A
and B. When VIDEO or S VIDEO is
selected, the output audio is the signal
input to AUDIO of VIDEO IN.
f REMOTE RS-232C connector (D-
sub 9-pin female)
Connects to the connector of the
computer when you operate the
projector from the computer.