The Input Setting Menu - Sony VPL-EX130 Operating Instructions Manual

The INPUT SETTING Menu

The INPUT SETTING menu is used to adjust the input signal.
When the signal is input from a computer
Setting items
Adjust Signal...
Dot Phase
H Size
Shift
Aspect (When the
video signal is
input)
30
The INPUT SETTING Menu
Functions
Adjusts the dot phase of the LCD panel and the signal
output from a computer.
Adjust the picture further for finer picture after the
picture is adjusted by pressing the APA key.
Adjusts the horizontal size of a picture output from a
computer.
Higher values increase the horizontal size of the
picture, while lower values decrease the horizontal
size. Adjust the setting according to the dots of the
input signal.
For details, see "Preset signals" on page 49.
Adjusts the position of the picture.
H adjusts the horizontal position of the picture.
V adjusts the vertical position of the picture.
As the setting for H increases, the picture moves to the
right, and as the setting decreases, the picture moves to
the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
b B
Use the or the key to adjust the horizontal
v
position and the and
You can set the aspect ratio of the picture to be
displayed for the current input signal. This item is
enabled only when an video signal (preset memory
numbers 1 to 11) is input.
• 4:3: Makes the aspect ratio 4:3.
• 16:9: Select to view a picture squeezed.
• Zoom: Select to enlarge the original picture without
distorting the aspect ratio. (Only when a preset
memory number 1 to 6 is input.)
V
key for the vertical position.
Initial setting
Set according to
the input signal
Set according to
the input signal
Set according to
the input signal
Set according to
the input signal