Sony VPL-EX130 Operating Instructions Manual page 33

Setting items Functions
Power Saving Selects the Power Saving mode.
• Lamp off: The lamp goes off if no signal is input for
• Standby: The projector goes into Standby mode if
• Off: The projector does not go into Power Saving
Panel Key Lock Locks all the control panel keys on the top panel of the
projector so that the projector can be operated only
with the Remote Commander.
To lock the control panel keys, set to "On."
When it is set to "On," keeping the ?/1 key on the
control panel pressed for 10 seconds turns the projector
on when it is in standby mode, and turns the projector
to standby mode when the power is on.
If you press and hold the MENU key for about 10
seconds when the power is on, the lock will be released
and "Panel Key Lock" is automatically set to "Off."
CC Display Turns on or off the Closed Captions (CC) function.
• Off: Turns off the Closed Captions (CC) function.
• CC1/CC2/CC3/CC4/TEXT1/TEXT2/TEXT3/
Lamp Timer Reset When replacing the lamps, reset the lamp timer.
Notes
• Press the APA key when the full image is displayed on the screen. If the projected image includes
a black portion around it, the APA function will not work properly and some parts of the image
may not be displayed on the screen.
- You can cancel the adjustment by pressing the APA key again while "Adjusting" appears on the
screen.
- The picture may not be adjusted properly depending on the type of input signal.
- Adjust the "Dot Phase," "H Size," and "Shift" items on the INPUT SETTING menu when you
adjust the picture manually.
• If the input signal is not displayed correctly when the input A signal classifying is set to "Auto,"
set it to conform the input signal.
• Closed Captioning is not displayed in the following cases:
- while you are adjusting the volume with VOLUME +/- on the remote commander
- while you are operating on-screen menus
- while "Please replace the Lamp." is displayed on the screen
10 minutes. The lamp lights again when a signal is
input or any key is pressed.
no signal is input for 10 minutes. To use it, turn on
the power again.
mode.
TEXT4: Selects a displayed version of the dialogue
or sound channel of a program.
Initial setting
Off
Off
Off
–
The SET SETTING Menu
33