Table of Contents
Advertisement
Control Panel
a ?/1 (On/Standby) key
Turns on the projector when the
projector is in standby mode. To turn off
the power, press the ?/1 key twice
according to the message or hold the ?/1
key for about one second.
Lights up or flashes under the following
conditions:
– Lights in red when the AC power cord
is plugged into a wall outlet. Once the
projector is in standby mode, you can
turn it on with the ?/1 key.
– Flashes in red when the temperature
becomes high inside the projector, or
when the projector fails to operate.
– Lights in green when the power is
turned on, and when it is ready to
operate.
– Flashes in green from the time when
the projector is turned on until the
projector is ready to operate. Also,
flashes in green while the cooling fan
is running after the power is turned off
with the ?/1 key. The fan runs for
12
Location and Function of Controls
1
2 3
– Lights in orange when the power
For details, see page 21.
b INPUT key
Selects an input signal. The input signal
will change whenever you press the key.
c ENTER/
Used to enter the settings of items in the
menu system, select a menu, or make
various adjustments.
d LAMP/COVER indicators
Flashes in orange under the following
conditions:
• A repetition rate of 2 flashes when the
• A repetition rate of 3 flashes when the
4 5
6
about 90 seconds after the power is
turned off.
saving mode is on.
/
/
/
(Arrow) keys
v
V
b
B
lamp cover or air filter cover is not
secured firmly.
lamp has reached the end of its life or
reaches a high temperature.
Hide quick links:
Advertisement
Table of Contents
