Checking The Version Of The Installed Data Administrator; Setup - Konica Minolta bizhub 223 User Manual

10.1 Using an authentication unit (biometric type)

Checking the version of the installed Data Administrator

1
From the [Help] menu of Data Administrator, select [Version Information].
NOTICE
This software cannot be used if the version is "3.x". Install "4.x".
If Data Administrator V3.x is installed, it is removed when V4.x is installed.
2
Click [Plug-in version].
3
In [Plug-in information list], confirm the plugin version of Data Administrator.
% This software is available if the plugin version is "4.x".

Setup

1
Turn the Main Power Switch of this machine off, and disconnect the authentication unit from this ma-
chine.
2
Install BioDriver (USB-Driver)
Connect the authentication unit to the USB port of your computer.
The [Found New Hardware] dialog box appears.
3
Select [Locate and install driver software (recommended)].
4
Insert the application CD-ROM provided with the authentication unit into the CD-ROM drive of the com-
puter.
bizhub 423/363/283/223
10
10-7