Security Settings]; Administrator Password]; User Box Administrator Setting] - Konica Minolta bizhub 223 User Manual

7.10

[Security Settings]

7.10 [Security Settings]
Configure the settings for the restricting the functions of this machine for processing secret data.
7.10.1

[Administrator Password]

Change the administrator password.
0 The administrator password can be entered using 0 through 8 digits.
0 If password rules are specified, an 8-digit password must be entered.
0 If you enter an incorrect administrator password a configured number of times, you are prohibited from
using this machine. In this case, contact your service representative.
1
Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Administrator Pass-
word].
Factory default
[Administrator Password]
2
Enter the administrator password, and then press [OK].
3
Enter a new administrator password.
4
Press [Password Confirmation], and enter the administrator password again.
5
Press [OK].
The password is changed.
d
Reference
To configure password rule settings:
Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Security Details] ö [Pass-
word Rules].
7.10.2

[User Box Administrator Setting]

Configure settings for the User Box operations. For details, refer to the [User's Guide Box Operations].
Reference
- This function is available only when a Hard Disk is installed.
bizhub 423/363/283/223
12345678
7
7-43