Output Settings] - Konica Minolta bizhub 223 User Manual

7.1 [System Settings]
7.1.2

[Output Settings]

Configure the settings for the output functions.
%
Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Output Settings].
Settings
[Print/Fax Output Settings]
[Output Tray Settings]
[Shift Output Each Job]
Factory default
[Print/Fax Output Settings]
[Output Tray Settings]
[Shift Output Each Job]
bizhub 423/363/283/223
This setting is for the print and fax operations. For details, refer to the [Us-
er's Guide Network Scan/Fax/Network Fax Operations] and [User's Guide
Print Operations].
Configure an output tray given priority for outputting by function.
This item is displayed if the Finisher FS-527 or Job Separator JS-505 is
installed.
Select whether to shift the output paper for each job.
This item is displayed if the Finisher FS-527, Finisher FS-529, or Job
Separator JS-505 is installed:
[Print]: [Page Print]
[Fax]: [Batch Print]
• [Copy]: [Tray 2]
• [Print]: [Tray 2]
• [Print Reports]: [Tray 1]
• [Fax]: [Tray 1]
[Tray 3] is displayed if the Job Separator JS-603 is installed in the Finisher
FS-527.
[Yes]
7
7-4