Konica Minolta bizhub 223 User Manual page 104

5.4 [Application]
%
Press [Application] ö [Stamp/Composition] ö [Stamp Repeat].
Settings
[Registered Stamp]
[Preset Stamp]
[Date/Time]
[Other]
[Detail Settings]
[Position]
d
Reference
To delete a registered stamp:
Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Stamp Settings] ö [De-
lete Registered Stamp].
bizhub 423/363/283/223
Select one from registered stamps.
Select a stamp to be printed from the eight types available.
Select the type of date and time notation. When [None] is selected for Time
Format, the time is not printed.
The date/time as of scanning the original is stamped on the paper.
[Job Number] Select Yes to print the copy job number.
[Serial Number] Select Yes to print the serial number of this ma-
chine.
For details on setting for the serial number, contact
your service representative.
[Distribution Control Prints the distribution control number.
Number] Specify the distribution control number using a val-
ue between 1 and 99999999.
Select [Text Size], [Density], or [Pattern Overwrite].
Change the angle as required when there are no more than four lines in the
selected repeating stamp.
[Change Pos./Delete] Change the arrangement order. Select the target
Stamp Repeat and press [Up] or [Down].
To add a space to repeated stamps, press [Insert
Space]. Press either [Up] or [Down] to move o that
appears beside the specified Stamp Repeat, and
then press [Insert].
To delete the Stamp Repeat text, press [Delete],
and then press the button for the Stamp Repeat
text to be deleted.
5
5-48