7.10
[Security Settings]
Factory default
[Job History Thumbnail
Display] *
[Secure Print Only]
[Copy Guard]
[Password Copy]
* This item is displayed only when a Hard Disk is installed.
7.10.5
[Enhanced Security Mode]
The enhanced security mode cannot be enabled when any of the current functional settings conflict with the
enhanced security mode.
When the enhanced security mode is enabled, the settings required for the mode or the settings that have
been forcibly switched when entering the mode cannot be changed.
Required settings
To enable the enhanced security mode, the following settings must have been configured.
Administrator Settings
[User Authentication/Account Track] / [General
Settings] / [User Authentication]
[Security Settings] / [Administrator Password]
[Security Settings] / [HDD Settings] / [HDD Encryp-
tion Setting] *
[Security] / [PKI Settings] / [SSL Setting] in Page-
Scope Web Connection
•
[Management Function Choice]
•
[CE Password]
•
[CE Authentication]
•
[HDD] *
All the settings above must be configured by your
service representative.
* This item is displayed only when a Hard Disk is installed.
Settings to forcibly changed
When the enhanced security is enabled, the following settings are forced.
-
The changed settings will not revert when the enhanced security mode is turned off.
-
After the password rules have been changed, any passwords that do not comply with the changed rules
will not be authenticated. For details on the password rules, refer to page 7-45.
-
For details on the network settings to be forcibly changed, refer to the [User's Guide Network
Scan/Fax/Network Fax Operations].
Administrator Settings
[System Settings] / [Restrict User Access] / [Re-
strict Access to Job Settings] / [Registering and
Changing Addresses]
[User Authentication/Account Track] / [General
Settings] / [Public User Access]
bizhub 423/363/283/223
[OFF]
[No]
[No]
[No]
Required settings
Select either [ON (External Server)] or [ON (MFP)].
•
Set a password complying with password rules.
Specify a HDD encryption passphrase.
•
•
These items must be configured by your service
representative. For details, contact your service
representative.
Settings to forcibly changed
Set to [Restrict].
Set to [Restrict].
When you enable account track, select [Ac-
count Name & Password] for the account track
input method.
Set [Mode using SSL/TLS] to [Admin. Mode]
and [User Mode].
Set [Encryption Strength] to [AES-256] or
[3DES-168].
7
7-47