Weekly Timer Settings] - Konica Minolta bizhub 223 User Manual

7.1 [System Settings]
Settings
Specify whether to apply daylight saving time in the time display on this machine. If [Yes] is selected, this
item displays the time that is ahead of the current time by the specified number of minutes. Specify a
length of time between 1 and 150 minutes on a 1-minute basis to apply daylight saving time.
Factory default
[Daylight Saving Time]
7.1.5

[Weekly Timer Settings]

Configure the weekly timer in order to allow you to turn on and off this machine at the specified date and time.
0 An exact date/time setting must be performed in advance.
%
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Weekly Timer Set-
tings].
Settings
[Weekly Timer ON/OFF
Settings]
[Time Settings]
[Date Settings]
[Select Time for Power
Save]
[Password for Non-Busi-
ness Hours]
Factory default
[Weekly Timer ON/OFF
Settings]
[Select Time for Power
Save]
[Password for Non-Busi-
ness Hours]
bizhub 423/363/283/223
[No]
Configure whether to use the weekly timer function.
Configure the time of each day of the week to turn on and off this machine.
[Set All] The setting for the selected day of the week is ap-
plied to the same day of the week in other weeks.
[Delete] Cancels the selected input value.
Configure the days when timer operation is activated individually. To can-
cel the setting, press the same day again.
[Daily Setting] Configure the days of the week when the timer
operation is activated.
Configure the time to turn this machine off and on if you want to turn it off
at a specific time, for example, during a lunch break.
Configure whether to require a user to enter the password if the user uses
this machine outside the specified time.
• To make the user to enter the password, you need to specify the pass-
word.
[OFF]
[No]
[No]
7
7-6