Maytag MTW6700TQ - 28" Washer Use And Care Manual page 15

You canstop tilewash c ycle and drain the tubbypressing thePause/Cancel button t wice or
thePower button once.
You canchange Cycles, Modifiers and Options anytime before S tart ispressed. Not a ll
Modifiers and Options are available forallcycles.
• Ashort tone sounds when achange isselected.
• Three short tones s ound i fanunavailable combination isselected. [helast s election will
notbeaccepted.
Changing Cycles after pressing Start
1. Press PAUSE/CANCEl. twice to cancel the cycle. The washer will drain.
2. Press POWER.
3. Select the desired wash cycle.
4. Select the desired Modifiers and Options.
5. Press START.
The washer restarts at the beginning of the new cycle.
NOTE: If you do not press Start within 5 minutes of pausing the washer, the washer
automatically shuts off.
Changing Modifiers and Options after pressing Start
You can change a Modifier or Option anytime before the selected Modifier or Option begins
by choosing the desired Modifiers and/or Options.
NOTE: An error tone will sound if your selection is unavailable.
To manually drain the washer and spin the load
1. Press PAUSE/CANCEl. twice to cancel the wash cycle and drain the washer.
2. Press POWER.
3. Turn knob to select [)RAIN & SPIN.
4. Press START.
When the spin is complete, the lid unlocks. Items can be removed from the washer.
d2_ +'_
L,_S _S
These lights show which portion of the cycle the washer is operating. They also indicate when
you can add other garments to the wash load.
DELAY SOAK WASH RINSE SPIN CLEAN
_o • • • • o_
ADD A GARMENT
Indicator lights
An indicator light shows which Cycle, Modifiers and Options you have selected.
Estimated Time Remaining
When a wash cycle is started, the estimated time remaining for the cycle, including fills and
drains, will be displayed. The time will count down to the end of the cycle.
ESTIMATED TIME
REMAINING
[urn the knob to choose the right wash cycle for the type of fabrics you are washing. When
the knob points to a cycle, the indicator light for the cycle will glow and the indicator light for
Start will blink. If the default settings for the Modifiers and Options are acceptable, you may
press Start to begin the wash cycle.
NORMAL WRINKLE
SHEETS CONTROL
COLORS/
JEANS
SUPER RAPID
WASH"
HAND
WASH
:LEAN
ONLY WASHER
WITH BLEACH
RINS ONLY
& SPIN SOAK
Preset Cycle Settings
For ease of use, [)reset cycle setti%s provide the recommended fabric care setti%s for each
cycle.
To use the preset cycle settings:
1. Press POWER.
2. Select the cycle you want by turning the knob. The preset cycle settings will be displayed
(see following chart).
NOTE: The preset times may vary slightly depending on your model.
3. Press START. ]he wash cycle will begin.
F_
!!{lll{l{!_!!iii!iiii_ii!!iiiiiiiiiiiiiiiiiiii_{{!!_!_i_!_!_!_!i{ii_i{{i_i{{i_i{{i_i{{i_i{{i_i{{i_i{{i_i{_ i@!_!_!_{i!ii;::!!i!!!:i!!! 15