Maytag MTW6700TQ - 28" Washer Use And Care Manual page 11

6. Check forleaks a round faucets and inlethoses.
Level the side.
5. If the washer is not level, move the washer out slightly, tip back, prop up the front of the
washer on a wood block. Adjust the feet up or down as necessary by twisting the feet.
Repeat steps 1 through 4 until washer is level.
6. Use a 9/16" or 14 mm open-end wrench to turn the Iocknut counterclockwise on the foot
tightly against the washer cabinet.
IMPORTANT: [f the Iocknut is not tight against the washer cabinet, the washer may
vibrate.
1. Check the electrical requirements. Be sure that you have the correct electrical supply and
the recommended grounding method. See "Electrical Requirements."
2. Check that all parts are now instal led. if there is an extra part, go back through the steps to
see which step was skipped.
3. Check that you have all of your tools.
4. Keep the foam packing ring from the washer tub for future relocation of the washer.
Dispose of/recycle all packaging materials.
5. Check that the water faucets are on.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
7. Plug into a grounded 3 prong outlet.
8. Remove any protective film or tape remaining on the washer.
9. Read "Washer Use."
10. [b test and to clean your washer, measure 1/2of the detergent manufacturer's
recommended amount of High Efficiency (HE) powdered or liquid detergent for a
medium-size load and pour it into the detergent dispenser. Close the lid. Press POWER.
Select a normal cycle and press Start. Allow it to complete one whole cycle.
BENEFITS AND FEATURES
Your washer has several benefits and features which are summarized here. Some items may
not apply to your model.
High-Efficiency Wash System
Your new top loading, high-efficiency washer saves you time by allowing you to do fewer,
larger loads. It also conserves resources and also lowers your water and energy bills by using
the following innovations.
IntelliFill 'M Water Level Control
This washer senses the load size and composition through a series of fills and wash motion. [t
then adjusts the water level for the best cleaning and rinsing performance. It eliminates the
guesswork. The water level is just right for every wash load size.
NOTE: You may notice during a cycle that the wash load is not completely submerged in
water. This is normal for your washer.