Introducing the Switch
Back of the Switch
Back of the Switch
Figure 1-7. HP ProCurve 2910al-48G Switch
Figure 1-8. HP ProCurve 2910al-24G-PoE+ Switch
al Module Slots
C a u t i o n
It is required for the switch to be powered down before inserting or extracting
the Expansion Module.
These switches support three al modules. The al modules provide different
types of connectivity options for the switch.
■
■
■
1-12
al module slots
Auxiliary Port and LED
al module slot
The J9149A – provides two 10-GbE CX4 fixed copper ports
The J9008A – provides two 10-GbE SFP+ slots that support a number of
different transceivers. For supported transceivers see
1-2.
The J9165A – these modules have 1 fixed short-range CX4 port (up to 3
meters), and comes in a kit of 2 modules with one 0.5 meter cable.
Primarily used to interconnect two switches at 10-GbE speed.
RPS Input Port
AC power connector
EPS Input Port
AC power connector
RPS Input Port
Table 1-1 on page