Console Cable Pinouts - HP J9146A - ProCurve Switch 2910al-24G-PoE Installation And Getting Started Manual

Installing the Switch
Installation Procedures
If you want to continue with console management of the switch at this time,
see chapter 3,
configuration steps. For more detailed information, refer to the Management
and Configuration Guide, which is on the ProCurve Website at
go/procurve/manuals.

Console Cable Pinouts

The console cable has an RJ-45 plug on one end and a DB-9 female connector
on the other end. Table 2-19 describes the mapping of the RJ-45 to DB-9 pins.
Figure 2-20. RJ-45 to DB-9 pinouts
Table 2-3.
RJ-45 (Signal reference from
2-26
"Getting Started With Switch Configuration"
5 4 3 2
8 7
9
Mapping of RJ-45 to DB-9
Chassis
Reserved 1
Reserved 2
TXD 3
Reserved 4
GND 5
RXD 6
Reserved 7
Reserved 8
1
6
DB-9 (Signal reference from PC)
8 CTS
6 DSR
2 RXD
1 DCD
5 GND
3 TXD
4 DTR
7 RTS
9 RI
for some basic
www.hp.com/
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8