Features - HP J9146A - ProCurve Switch 2910al-24G-PoE Installation And Getting Started Manual

Features

Module Status
LEDs
Link and Mode LEDs
(one pair per port)
Figure 2.
The al Modules have the following features:
■
■
■
■
Standards adherence:
■
■
N o t e
The al modules are not "Hot-swappable".
Copper CX4 port connections
Front of the al 10-GbE CX4 Module
Connectivity ports.
LEDs that provide information for each port on the link and mode status.
LED that provides information on module status.
"hot swap transceiver" support—you can add, replace, or change the type
of any of the transceivers that you use in the SFP+ module ports, without
having to first remove the module, and without having to shut down the
switch.
IEEE 802.3ak CX4
IEEE 802.3ae XAUI
HP ProCurve 10-GbE CX4 al Module
Retaining screw
Introducing the Switch
Features
1-15