HP J9146A - ProCurve Switch 2910al-24G-PoE Installation And Getting Started Manual: Sample Network Topologies

Installation guide.
Hide thumbs

Advertisement

Installing the Switch

Sample Network Topologies

Sample Network Topologies
This section shows a few sample network topologies in which the switch is
implemented. For more topology information, see the ProCurve network
products Website, www.hp.com/go/procurve.
Servers
ProCurve Switch 5406zl
Gigabit fiber cable
ProCurve Switch 2910al
Gigabit copper cable
PCs and peripherals
Figure 2-21. Example, gigabit edge deployment
The Switch 2910al can be used at the edge of the network to which end nodes,
printers and other peripherals, are directly connected, as shown in the above
illustration. Notice that the end node devices are connected to the switch by
gigabit copper cable, straight-through or crossover twisted-pair cables.
2-29

Advertisement

   Related Manuals for HP J9146A - ProCurve Switch 2910al-24G-PoE

This manual also for:

Procurve 2910al

Comments to this Manuals

Symbols: 0
Latest comments: