Front USB Panel
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Remove the front bezel
4.
Disconnect the front I/O cable from the blue system board connector (P6) and the USB cable from
the yellow system board connector (FRONT_USB, P24).
5.
Stand the unit upright.
6.
Remove the silver T15 screw that secures the panel to the chassis.
7.
Pull the panel away from the unit while threading the wires between the drive cage and the baffle
and through the hole in the front of the chassis.
To reinstall the panel, reverse the removal procedure.
(Preparation for Disassembly on page
(Computer Access Panel on page
(Front Bezel on page
67).
61).
66).
Front USB Panel
95