Front I/O and USB Panel Housing Assembly
Description
Front I/O and USB assembly without card reader
Front I/O and USB assembly with card reader
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Lay the computer on its side with the front facing toward you.
4.
Remove the front bezel
5.
Remove the cables from the metal clip built into the bottom of the chassis, and then unplug the
three cables that connect the assembly to the system board. The assembly cables connect to
the following system board connectors:
Table 7-8
HP Pro 3400/3410 models
F_AUDIO – yellow connector
F_USB2 – white connector
F_USB3 – white connector
Figure 7-17
(Access Panel on page
(Front Bezel on page
Front I/O connectors
Front I/O connectors- HP Pro 3400/3410 models[3400 shown)
(Preparation for Disassembly on page
43)
44).
HP Pro 3405 models
F_AUDIO – yellow connector
F_USB1 – white connector
F_USB4 – white connector
Front I/O and USB Panel Housing Assembly
Spare part number
667853-001
667852-001
42).
63