HP 5850 - Deskjet Color Inkjet Printer Reference Manual page 147
Business pc
Hide thumbs
Also See for 5850 - Deskjet Color Inkjet Printer:
- Support list (34 pages) ,
- Support telephone numbers (19 pages) ,
- Instructions manual (6 pages)
Table of Contents
Advertisement
4.
Install two M3 metric guide screws in the lower holes on each side of the drive. HP has provided
four extra M3 metric guide screws on the front of the chassis, under the front bezel. The M3 metric
guide screws are black. Refer to
the extra M3 metric guide screws location.
CAUTION:
Use only 5-mm long screws as guide screws. Longer screws can damage the internal
components of the drive.
NOTE:
When replacing the drive, transfer the four M3 metric guide screws from the old drive to
the new one.
5.
Position the guide screws on the drive into the J-slots in the drive bay. Then slide the drive toward
the front of the computer until it locks into place.
Installing and Removing Drives on page 130
for an illustration of
Drives 135
Advertisement
Table of Contents
