Setting The Smart Cover Sensor Protection Level; Smart Cover Lock; Locking The Smart Cover Lock - HP 5850 - Deskjet Color Inkjet Printer Reference Manual

Table 4-2 Smart Cover Sensor Protection Levels (continued)
Level
Level 2
NOTE: These settings can be changed using Computer Setup. For more information about Computer Setup,
see the Computer Setup (F10) Utility Guide.

Setting the Smart Cover Sensor Protection Level

To set the Smart Cover Sensor protection level, complete the following steps:
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
2. As soon as the computer is turned on, press
Computer Setup. Press
NOTE:
press F10
3. Select Security > Smart Cover > Cover Removal Sensor, and select the desired security level.
4. Before exiting, click File > Save Changes and Exit.

Smart Cover Lock

The Smart Cover Lock is a software-controllable cover lock featured on some HP computers. This lock
prevents unauthorized access to the internal components. Computers ship with the Smart Cover Lock
in the unlocked position.
CAUTION:
password prevents unauthorized access to the Computer Setup utility.
NOTE: The Smart Cover Lock is available as an option on some systems.

Locking the Smart Cover Lock

To activate and lock the Smart Cover Lock, complete the following steps:
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
2. As soon as the computer is turned on, press
Computer Setup. Press
NOTE:
press F10
3. Select Security > Smart Cover > Cover Lock > Lock option.
4. Before exiting, click File > Save Changes and Exit.
46 Chapter 4 Desktop Management
Setting Description
Setup Password When the computer is restarted, the screen displays a message
indicating that the computer cover or side panel has been removed. You
must enter the setup password to continue.
Enter to bypass the title screen, if necessary.
If you do not press F10
when the monitor light turns green to access the utility.
For maximum cover lock security, be sure to establish a setup password. The setup
Enter to bypass the title screen, if necessary.
If you do not press F10
when the monitor light turns green to access the utility.
F10 when the monitor light turns green to enter
at the appropriate time, you must restart the computer and again
F10 when the monitor light turns green to enter
at the appropriate time, you must restart the computer and again