User Access-Control Mac-Based; User Access-Control Port-Based - TP-Link JetStream L2 Lite TL-SG3210 Cli Reference Manual

TP-LINK(config)#
255.255.255.0

user access-control mac-based

Description
The user access-control mac-based command is used to limit the MAC
Address of the users for login. Only the user with this MAC Address you set here
is allowed for login
Syntax
user access-control mac-based mac-addr
Parameter
mac-addr —— The source MAC address.
Command Mode
Global Configuration Mode
Example
Enable
00:00:13:0A:00:01:
TP-LINK(config)# user access-control mac-based 00:00:13:0A:00:01

user access-control port-based

Description
The user access-control port-based command is used to to limit the ports for
login. Only the users connected to these ports you set here are allowed for
login.
Syntax
user access-control port-based port-list
Parameter
port-list ——The Ethernet port numbers. You can appoint 5 ports at most.
Command Mode
Global Configuration Mode
user
the access-control
45
access-control ip-based
of the user whose
192.168.0.148
MAC address is