Chapter 10 User Manage Commands; User Add - TP-Link JetStream L2 Lite TL-SG3210 Cli Reference Manual

Chapter 10 User Manage Commands

User Manage Commands are used to configure the user name and password for users to log on to
the Web management page with a certain access level so as to protect the settings of the switch
from being randomly changed.

user add

Description
The user add command is used to add a new user.
Syntax
user
confirm-password {guest | admin} {disable | enable}
Parameter
user-name ——Type a name for users' login, which contains 16 characters at
most, composing digits, English letters and underdashes only.
password ——Type a password for users' login, which contains 16 characters at
most, composing digits, English letters and underdashes only.
confirm-password ——Type the password again.
guest | admin —— Access level.
Guest： only can view the settings without the right to edit and modify.
Admin: can edit, modify and view all the settings of different functions.
disable | enable ——Enable/disable the user.
Command Mode
Global Configuration Mode
Example
Add and enable a new admin user named tplink, and of which the password is
password:
TP-LINK(config)#user add tplink password password confirm-password
password admin enable
add user-name
41
password password confirm-password