Show Qos Port-Based; Show Qos Dot1P; Show Qos Dscp - TP-Link JetStream L2 Lite TL-SG3210 Cli Reference Manual
Managed switch
Hide thumbs
Also See for JetStream L2 Lite TL-SG3210:
- User manual (292 pages) ,
- Cli reference manual (285 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
show qos port-based
Description
The show qos port-based command is used to display the configuration of
QoS based on port priority.
Syntax
show qos port-based [interface-num]
Parameter
interface-num —— The Ethernet port selected to display the configuration,
ranging from 1 to 10. By default, information of all the ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the configuration of QoS for port 5:
TP-LINK# show qos port-based 5
show qos dot1p
Description
The show qos dot1p command is used to display the configuration of IEEE
802.1P Priority.
Syntax
show qos dot1p
Command Mode
Any Configuration Mode
Example
Display the configuration of IEEE 802.1P Priority:
TP-LINK# show qos dot1p
show qos dscp
Description
The show qos dscp command is used to display the configuration of DSCP
Priority.
Syntax
121
Hide quick links:
Advertisement
Table of Contents
