1.4 Conventions; 1.4.1 Format Conventions; 1.4.2 Special Characters; 1.4.3 Parameter Format - TP-Link JetStream L2 Lite TL-SG3210 Cli Reference Manual

1.4 Conventions

1.4.1 Format Conventions

The following conventions are used in this Guide:
Items in square brackets [ ] are optional
Items in braces { } are required
Alternative items are grouped in braces and separated by vertical bars. For example: speed
{10 | 100 | 1000 }
Bold indicates an unalterable keyword. For example: show logging
Normal Font indicates a constant (several options are enumerated and only one can be
selected). For example: switchport type { access | trunk | general }
Italic Font indicates a variable (an actual value must be assigned). For example: bridge
aging-time aging-time

1.4.2 Special Characters

You should pay attentions to the describtion below if the variable is a character string:
These six characters " < > , \ & can not be input.
If a blank is contained in a character string, single or double quotation marks should be used,
for example 'hello world', "hello world", and the words in the quotation marks will be identified
as a string. Otherwise, the words will be identified as several strings.

1.4.3 Parameter Format

Some parameters must be entered in special formats which are shown as follows:
MAC Address must be enter in the format of xx:xx:xx:xx:xx:xx
One or several values can be typed for a port-list or a vlan-list using comma to separate. Use
a hyphen to designate a range of values, for instance, 1,3-5,7 indicates choosing 1,3,4,5,7.
11