Switchport Voice-Vlan Security; Show Voice-Vlan Global; Show Voice-Vlan Oui - TP-Link JetStream L2 Lite TL-SG3210 Cli Reference Manual

switchport voice-vlan security

Description
The switchport voice-vlan security command is used to configure the Voice
VLAN security mode.
Syntax
switchport voice-vlan security {disable | enable}
Parameter
disable / enable —— disable/enable the security mode for the specified port .
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Enable Ethernet port 2 for the Voice VLAN security mode:
TP-LINK(config)# interface ethernet 2
TP-LINK(config-if)# switchport voice-vlan security enable

show voice-vlan global

Description
The show voice-vlan global command is used to display the global
configuration information of Voice VLAN.
Syntax
show voice-vlan global
Command Mode
Any Configuration Mode
Example
Display the configuration information of Voice VLAN globally:
TP-LINK(config)# show voice-vlan global

show voice-vlan oui

Description
28