HP 400338-001 - KVM Switch Owner's Manual page 29

5. Press Enter to accept the changes or press Esc to exit the menu without
Setting the ID Window Dwell Time
This menu selection lets you set the time that the ID Window remains on screen
after a port switch. Each port can be confi gured independently. The default
time is set for fi ve seconds.
1. Highlight the port you wish to change in the main OSD Window.
2. From the main OSD Window, press the Ctrl key twice to access the Administrator
3. Select 'Edit Port' from the Command Menu.
4. Choose the option 'ID Dwell Time'.
5. Enter a number between 0-255 seconds. Entering 0 disables the ID Window.
www.hp.com/racksolutions
saving the changes.
Command Menu.
Entering 255 allows the ID Window to stay on screen the entire time
the port is active.
On-Screen Display Operations
23