Advanced Install - HP 400338-001 - KVM Switch Owner's Manual

Rackmount Console Switch Owner's Manual

Advanced Install

Attaching Multiple Rackmount Console Switches
1. Follow steps 1-3 of the Basic Install section for each cascaded unit.
2. Plug the 25-pin "D" connector of your input cable into any available server port
3. Plug the 15-pin video connector on the other end of the cable into the port
4. Repeat steps 4-7 in the section 'Connecting Servers to the Rackmount Console
(J1474A MODELS SHOWN)
12
on the rear of your base Rackmount Console Switch.
labeled on your fi rst cascading switch. Plug the PS/2 mouse connector,
designated by a mouse icon, into the
miniDIN keyboard connector into the
Switch' for each attached server.
PS/2 MOUSE
CONNECTOR
port. Plug the remaining 6-pin
port.
PS/2 KEYBOARD CONNECTOR
www.hp.com/racksolutions
CASCADING
UNIT
BASE UNIT
VIDEO
CONNECTOR