Installation Of Built-In Hdd (Hard Disc Drive); Power Cable Installation Of The Front Projector Light - Gigabyte Poseidon GZ-XA1CA-STB User Manual

User manual
Table of Contents

Advertisement

4-8 Installation of Built-in HDD (Hard Disc Drive)

The Poseidon built-in HD drive bay can be installed with up to 3 HDDs. The built-in HDD requires
securing runners, which are located in the accessory box below.
Required tools: 6 securing runners (in the accessory box)

4-9 Power cable installation of the front projector light

14
4-7-3 Refer to the installation order illustrated in the left
fi gure and secure the 3.5" fl oppy disc drive by
controlling the latch. (Reverse steps for disassembly)
4-7-4 Installation completed.
4-8-1 Use the runners installed on both sides of the HDD
evenly and slide the HDD into the hard disk drive
bay.
4-9-1 Plug the front projector light 4-pin power cable into
the 4-pin connector on the motherboard.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poseidon gz-xa1ca-sts

Table of Contents