Table of Contents
Advertisement
4-10 DIY Front Bracket of Projector Light
The Poseidon is provided with another transparent projector panel, which can be DIY designed
and replaced with the projector bracket under front panel.
Required tool: transparent projector panel (slides and laser printer or copy machine should be
provided by the user)
4-10-1 Please visit Gigabyte website (http://
gwebmanager1:7001/Products/Chassis/Default.
aspx) to search the Poseidon series case products
by fi le name "DIYbracket_Poseidon.doc".
Print out the slides by 1:1
(Please use the laser printer or copy machine)
4-10-2 Trim the slide along the edge lines.
4-10-3 Post the trimmed slide onto the transparent projector
panel.
4-10-4 Remove the factory default plate located in the
bottom of the front panel.
(See Figure a and Figure b)
4-10-5 Push forward to remove the factory default plate.
15
Advertisement
Table of Contents
