Side Panel Introduction - Gigabyte Poseidon GZ-XA1CA-STB User Manual

1-2 Side Panel Introduction

See-through side panel installation
complete fi gure (A-1)
(Factory default: vent side panel)
1-2-1 To replace the See-through side panel:
6
Step 1: Release 4 screws at the rear of the side panel to
remove the panel.
Step 2: Remove the factory default perforated side panel.
Step 3: Draw out the perforated side panel.
Step 4: Place and screw the See-through side panel properly
to complete the installation procedure.