Coordinate System Selection - Eagle IntelliMap 642c iGPS Installation And Operation Instructions Manual

•
VLW transmits the distance traveled through water as meas-
ured by the paddle wheel.
•
VHW transmits the water speed as measured by the paddle
wheel.
4. When the desired prefixes are turned on, press
back to the main page display.

Coordinate System Selection

The Coordinate System Menu lets you select the coordinate system to
use when displaying and entering position coordinates.
Menus used for changing coordinate system.
To get to Coordinate System Selection:
1. Press
MENU
2. Press ↓ to
C
This unit can show a position in degrees (36.14952°); degrees, minutes
and thousandths of a minute (36° 28.700'); or degrees, minutes, seconds
and tenths of a second (36° 28' 40.9"). It can also show position in: UTM
(Universal Transverse Mercator) projection; MGRS (Standard); MGRS
(Standard + 10); Map Fix; Loran TD; British, Irish, Finnish, German,
New Zealand, Swedish, Swiss, Taiwan and Greek grid systems.
UTM's are marked on USGS topographic charts. This system divides
the Earth into 60 zones, each 6 degrees wide in longitude.
British, Irish, Finnish, German, New Zealand, Swedish, Swiss, Taiwan,
and Greek grid systems are the national coordinate system used only in
their respective countries. In order to use these grid systems, you must
be in the respective country. This unit will pick the matching datum for
you when you select the grid. See the entry on Map Datum Selection for
more information.
| |↓ to
MENU GPS S
S
OORDINATE YSTEM
| .
ENT
ETUP
| .
ENT
70
repeatedly to get
EXIT