Eagle IntelliMap 642c iGPS Installation And Operation Instructions Manual page 108

8. To navigate to the address, press
The unit will begin showing navigation information to the address. If
you are only looking up an address, highlight
map page will appear with the cursor crosshairs centered on the ad-
dress.
Tip:
If the address happens to be an item in the Point of Interest data-
base, you can look up the item's phone number in the Waypoint In-
formation list. With the address selected by the cursor on the map,
press
WPT
the Go To Waypoint command highlighted. If you want to go ahead
and navigate to the POI address, just press
Map Page showing location of address on the map, highlighted by cur-
sor (left). Address is a business in the POI database, so you can display
the POI information window (center). This address (right) is not in the
POI database, so the Waypoint key will not display information for it.
A POI selected by the cursor (left). POI information screen (right).
. The POI's Waypoint Information window appears, with
select
MENU
F
ENT
102
and press
G T
O O
and press
IND
| .
EXIT
.
ENT
. The
ENT