Moving Around The Map: Zoom & Cursor Arrow Keys - Eagle IntelliMap 642c iGPS Installation And Operation Instructions Manual

Find Your Current Position
Finding your current position is as simple as turning on the unit. Un-
der clear sky conditions, the unit automatically searches for satellites
and calculates its position in approximately one minute or less.
NOTE:
Clear sky conditions means open sky, unobstructed by terrain,
dense foliage or structures. Clouds do not restrict GPS reception.
If for some reason satellite acquisition takes longer, you may be inside
a structure or vehicle or in terrain that is blocking signal reception. To
correct this, be sure you are positioned so that the unit has as clear a
view of the sky as possible, then turn the unit off and back on again.
Moving Around the Map: Zoom & Cursor Arrow Keys
The map is presented from a bird's eye view perspective. The current
zoom range shows in the lower left corner of the screen.
1. Press the
ZIN
a smaller geographic area.
2. Press the
ZOUT key
detail, but a larger geographic area.
When you are traveling, the map will automatically move as you move.
This keeps your current location roughly centered on the screen.
You can manually pan or scroll the map northward, southward, east-
ward or westward by using the arrow keys, which launch the cross-hair
map cursor. This allows you to look at map places other than your cur-
rent position. To clear the cursor, press
back to the current position or the last known position.
Tip:
Use the cursor to determine the distance from your current position
(or last known position, when working indoors) to any map object or
location. Use the arrow keys to position the cursor over the object or
place. The distance, measured in a straight line, appears in the
popup data box. Press
key (zoom in) to move in closer and see greater detail in
(zoom out) to move farther away and see less map
EXIT
EXIT
to clear the cursor.
35
, which jumps the map