Edit A Route Name; Edit Route Waypoints; Navigate A Route - Eagle IntelliMap 642c iGPS Installation And Operation Instructions Manual

Edit a Route Name

1. From the
press |
MENU MENU
2. Highlight Saved Route Name|
3. Press ↑ ↓ to change the first character, then press → to move to the
next character and repeat until the name is correct. Press
turn to the main page display press

Edit Route Waypoints

You can edit the route by adding and removing waypoints.
1. From the
press |
MENU MENU
2. Press ↓ to saved route name|
to select a waypoint and press
3. Use ↓ ↑ to select a command from the Edit Route Waypoints menu
and press
ENT
Add Waypoint calls up the Waypoint List so you can insert a waypoint
from the list. Remove Waypoint will delete the waypoint from the route.
View Waypoint will show you where the waypoint is on the map.
NOTE:
When adding waypoints to a route, the inserted waypoints will ap-
pear in front of the waypoint you have selected. To insert waypoints
at the end of the route, select

Navigate a Route

1. From the
press |
MENU MENU
N P
AVIGATION AGE
|↓ to
R
OUTE
N P
AVIGATION AGE
|↓ to
R
OUTE
Edit Route Waypoints menu.
. Add From Map lets you insert a waypoint in the route.
N P
AVIGATION AGE
|↓ to
R
OUTE
, press
MENU
|
P ENT
LANNING
|↑ to Name|
ENT
repeatedly.
EXIT
, press
MENU
|
P ENT
LANNING
|↓ to Route Waypoints List. Use ↓ ↑
ENT
.
ENT
(R
OUTE END
, press
MENU
|
P ENT
LANNING
59
| or from the
ENT
.
.
ENT
| or from the
ENT
.
before adding them.
)
| or from the
ENT
.
M P
AP AGE
. To re-
ENT
M P
AP AGE
,
M P
AP AGE