Eagle IntelliMap 642c iGPS Installation And Operation Instructions Manual page 46

Step 1. Step 2.
Step 4.
Step 3.
Sequence for setting a waypoint. Step 1: while traveling, press WPT to
call up Find Waypoint screen (seen in Step 2) and set a point. Step 3: a
message says the waypoint has been saved. Step 4: vehicle continues
on its way; number waypoint symbol is visible on map.
Create Waypoint on Map
1. Use the arrow keys to move the cursor to the place where you want
to make a waypoint.
2. Press | . The waypoint is saved and automatically given a
WPT WPT
name with a sequential number, such as waypoint 001. The waypoint
symbol and number appear on the map.
Create Waypoint by Entering a Position
1. Press |↑ to |→ to | .
WPT M W N ENT
Y AYPOINTS EW
2. Press ↓ to
| |→ to | .
E P ENT C ENT
NTERED OSITION REATE
3. Press → to . Enter the latitude by pressing ↑ ↓ to
|
L ENT
ATITUDE
change the first character, then press → to the next character and re-
peat until the latitude is correct. Press .
ENT
40