Find Any Item Selected By Map Cursor; Find Interstate Highway Exits - Eagle IntelliMap 642c iGPS Installation And Operation Instructions Manual

Find Any Item Selected by Map Cursor

On the Map Page with a POI or map feature selected by the cursor
press To return to the main page display, press
WPT.
NOTE:
Since the Go To waypoint command is highlighted, you can navi-
gate to the selected POI by pressing
Waypoint Information screen.

Find Interstate Highway Exits

1. From the Map Page, press
launch the Find Exit menu.
Find Highway Exits command (left) and Find Exit menu (right).
2. First, select a highway name by pressing
Find By Name menu. There are two highway search options: A. You
can spell out the highway name in the top selection box. Press ↑ ↓ to
change the first letter, then press → to move the cursor to the next let-
ter and repeat until the name is correct, then press
down to the lower selection list by pressing
a highway from the list, then press
ENT
|↓ to
MENU H
IGHWAY
ENT
.
ENT
103
.
EXIT
| while in the POI
EXIT
| , which will
E ENT
XITS
, which calls up the
ENT
|
ENT ENT
, then press ↓ ↑ to select
. B. Jump