Receiving Faxes Manually; Receive A Fax By Polling - Epson WorkForce WF-2510WF User Manual

User's Guide

Receiving faxes manually

If your phone is connected to the product, you can receive fax data after the connection is made.
A
Load plain paper in the rear paper feed.
"Loading Paper and Envelopes" on page 22
&
B
When the telephone rings, lift the phone connected to the product.
C
When you hear a fax tone, select Receive on the control panel of the product.
D
Start receiving the fax.
Color 2.5-inch display models:
Press one of the x buttons.
Monochrome 2-line display models:
Select Yes.
E
Put the phone back on the hook.
Note:
If Auto Answer mode is turned on, the received fax data is automatically printed, and you do not have to proceed to
step 6.
F
Print the received fax.
Color 2.5-inch display models:
Press one of the x buttons.
Monochrome 2-line display models:
Press OK.

Receive a fax by polling

This allows you to receive a fax from the fax information service you have called.
Follow the instructions below to receive a fax by polling.
A
Load plain paper in the rear paper feed.
"Loading Paper and Envelopes" on page 22
&
B
Press K to enter the fax mode.
Faxing
76