Sending Faxes By Broadcasting - Epson WorkForce WF-2510WF User Manual

User's Guide
Note:
When using group dial, you can only send B&W faxes.
A
Place your original(s) in the Automatic Document Feeder or on the scanner glass.
"Placing Originals" on page 24
&
B
Press K to enter the fax mode.
C
Press .
Note:
Each press of
D
Select the entry number to send. Use u or d to select an entry, and press OK.
Monochrome 2-line display models:
You will be prompted to add another number. You can add another number by manually entering the number
or using the speed dial or group dial.
Note:
You can change fax quality and contrast settings. When finished, press x again to return to the fax mode top
screen.
Color 2.5-inch display models:
Press x and select Send Settings - Quality or Contrast.
Monochrome 2-line display models:
Press x and select Quality or Contrast.
E
Press one of the x buttons to start sending.

Sending faxes by broadcasting

Broadcast allows you to easily send the same fax to multiple numbers (up to 30) using speed dial/group dial, or by
entering the fax numbers. Follow the instructions below to send faxes by broadcasting.
Note:
❏ This function is available only with color 2.5-inch display models.
❏ You can only send B&W faxes.
A
Place your original(s) in the Automatic Document Feeder or on the scanner glass.
"Placing Originals" on page 24
&
B
Press K to enter the fax mode.
C
Press x to display the menus.
switches between the speed dial list and group dial list.
Faxing
72